Spinrite is a hard drive recovery and maintenance utility written bySteve Gibson from Gibson Research Corporation. It is marketed on theSecurity Now TWiT podcast which I often listen to. I have bought a copyof it and sometimes use it on solid state disks or SD cards. Spinrite6.0 is written is assembly language and runs on top of MS-DOS or FreeDOS,using the BIOS. UEFI is not supported and neither are NVMe drives. This postwill show you how to run Spinrite 6.0 on such a system anyway, using a modernlinux live USB drive that can boot on UEFI only system and VirtualBox,exposing the NVMe disk as a SATA drive.
Spinrite HARD DRIVE DIAGNOSTICS BOOT ISO Download Pc
If you have a system that can boot via the BIOS (legacy boot) and set the SATAcontroller to AHCI, that is your best bet, it will probably run Spinrite justfine. My most recent work machine however is a UEFI only system with nooption to set the disk mode to AHCI. It has a legacy boot option, but thatfails to boot Spinrite via FreeDOS (erroring out with Invalid Opcode at 000xyyzz...). Making an actual MS-DOS live disk does let it boot up, but when it isenumerating the drives, it reboots the machine. The drives are two NVMe SSD disks.
The process I used to run Spinrite was to boot up a Debian linux derivative(Antix 22) that supports UEFI only systems and install VirtualBox in thatlive environment. VirtualBox can pass through actual drives as other storagetypes (a SATA drive as IDE for example), which Spinrite then can scan.
Raw hard disk access is for expert users only. Incorrect use or use of an outdated configuration can lead to total loss of data on the physical disk. Most importantly, do not attempt to boot the partition with the currently running host operating system in a guest. This will lead to severe data corruption.
Fire up the virtual machine again, let Spinrite boot up and if all went well,you should now be able to select your NVMe disk. Below is a screenshot ofSpinrite running in VirtualBox on an 256 GB NVMe SSD drive, on a machinewithout a classic BIOS or legacy boot option:
Before going the VirtualBox route, I tried to use KVM via virt-manager butthat failed to pass through the NVMe drive. First it errored on the cachemode, but none of the methods worked (writeback, etc), then after messingaround I received a few more errors. VirtualBox worked instantly withoutissues, but I did try kvm first because I thought that virtualbox required areboot after installing, which wasn't the case after all.
For those with an unbootable Windows, a rescue disc can be a life saver for a SysAdmin. It is packed with various diagnostic and repair tools that can do things like fix a Master Boot Record (MBR), recover a password, detect and clean a rootkit or simply allow you to salvage data by transferring it from a damaged drive to another location. Below is a list of bootable rescue discs.
It requires no installation. It can be used on linux servers, linux desktops or windows boxes. The kernel supports the important file systems (ext2/ext3/ext4, reiserfs, reiser4, btrfs, xfs, jfs, vfat, ntfs, iso9660), as well as network filesystems (samba and nfs). The bootable ISO consolidates as many diagnostic tools as possible into one bootable CD, DVD, or thumb drive. When you boot up from the CD, a text-based menu will be displayed, and you will be able to select the tool you want to run. The selected tool actually boots off a virtual floppy disk created in memory.
I could not get SpinRite 6.0 to boot from my USB drive by using its built-in installer. I tried the accepted answer but it didn't work because HP USB Disk Storage Format Tool reported "Device media is write-protected" (but for some reason it was writable by everything else).
If you're feeling fancy, you can also integrate Spinrite onto a syslinux or extlinux usb drive with a boot menu. For example, here's a minimal working syslinux.conf that also includes memtest on a single usb drive:
Run the HP tool, pointing it at the directory where you unzipped the DOS boot files, and it will automatically build a bootable DOS USB drive using those files. Next, copy your original SPINRITE.EXE file onto the root directory of your USB drive. Once done, reboot the system with your BIOS configured to boot from USB drives. At the DOS prompt, type spinrite to start SpinRite.
SpinRite 6.0 lets you install make any writable drive bootable using an option on its main menu, as noted above by Travis. You may have to hunt around a bit in your BIOS Setup menu to find the option for elevating you drive, such as a USB flash drive, to the first position.
You can make an inexpensive, quiet "SpinRite machine" by buying a Zotac mini-PC without a hard drive and just booting from a USB flash drive or memory card. Plug in a hard drive dock (toaster) so you can easily prepare or refresh any of your 3.5 or 2.5 inch drives.
The laptop has a 1TB HDD that had massive bad sectors in the C: partition. I bought a 500GB SSD, copied the non-damaged other partitions to it, and am trying to access the recovery partition that I copied to restore the computer on the new SSD. Encountered a plethora of issues trying this, with as result, computer still not booting into the recovery partition, and still not working.I don't have recovery media for this laptop, thought the recovery partition would be enough for this, it seems UEFI and .wim files made it harder than this used to be.
Hi Mark,If hard drive failed recovery partition gets corrupted and is rendered useless anymore. Bad sectors necessarily need not be present in recovery partition alone to make it useless. It can be anywhere, but it would affect recovery partition.Have you done System Diagnostics testing from BIOS/UEFI to tests the hard drive? Did it give fail?If you try cloning from a failing HDD to SSD, you're going to clone rendered useless recovery partition to SSD too. So that is not going to work at all. You shouldn't have copied recovery partition at all.That is why all the HP Experts and volunteers here suggest to create HP recovery USB using HP Recovery Manager just after initial setup of your laptop -en/document/c03821679Your laptop came with Windows 8 64 bit from factoryHave you successfully upgraded and activated to Windows 10 Home previously? If so, you can clean install Windows 10 Home using this tutorial by creating bootable installation USB using Microsoft windows media creation tool: -clean-install-windows-10-a.htmlAlternatively if you've not upgraded, you can do a clean install of Windows 8.1 64 bit on your Windows 8 laptop using Microsoft windows media creation tool by creating UEFI bootable installation USB, follow this: -windows-8-windows-8-1-iso-download-create.html -clean-install-windows-8-a.html
Regardless of the issue, you need a solution to save your disc and retrieve all essential data as quickly as possible. Your best chance is to invest in some reliable software designed to repair hard drives. This article will discover ten of the best hard drive repair software. Let's get going!
Overheating: Excessive heat will also severely harm the components of a hard disk drive. Disk platters expand as the temperature increases and shrink when the temperature falls. This may lead to a deformed magnetic surface with tiny fissures, a serious flaw that threatens data.
If your hard drive is causing errors and you plan to get it repaired either by software or a professional, you need to recover your data first. Most of the time, repair tools delete your essential data, and since some files are too important to lose, recover your data before getting your drive repaired.
Wondering what the best free hard drive repair software is? Find answers in this section. Hard drives are prone to errors due to excessive heating, file corruption, and other ransomware attacks. The following are the best in the market:
If you want the software to repair your hard drive, EaseUS CleanGenius is your best bet. It comes with a QuickScan feature that scans your hard drive to find and solve the issues. It optimizes the speed and performance of your PC by optimizing the system's OS.
The majority of consumers begin their hunt for disc repair software before they are even aware of the nature of the problem with their disc. The faulty sectors may contain nothing but meaningless data, which would make your efforts to restore them. WinDirStat can assist in providing you with an exact evaluation of the data stored on your hard drive and how it is structured.
Glary Utilities is amongst the best hard drive repair software you can get for repairing a malfunctioning hard drive. It allows you to optimize your OS performance by detecting errors through deep scanning. You can recover files using this tool.
HDD Regenerator is superior to Windows built-in hard drive repair tool, which can address damaged sectors and file access difficulties caused by them. When using HDD Regenerator on Windows XP/Vista/7/8/10, you may use Dmitriy Primochenko's original Hysteresis technology to recover unreadable data. Hysteresis loops generator is a recovery technique that can discover and fix faulty sectors on a hard disk drive using this hard drive repair tool.
According to our evaluation, it is excellent at its job. If faulty sectors plague your hard drive, you should use this application. However, its UI is a little restricted, but it isn't that tough to use.
You'll be shocked to find SpinRite (a program for retrieving deleted files from magnetic data storage devices like hard drives) on this list. We decided to add it because it's still the greatest hard disk repair tool for older machines. A live version of FreeDOS makes it possible to scan any machine, even if the operating system is no longer functional. Supported file systems include all Linux and Novell file systems and Windows DOS FAT.
To avoid data loss or corruption, GParted is a free graphical partition editor that you may use. To make room for a new operating system or a backup partition, you may need to reduce a partition. It is also available as a bootable GNU/Linux distribution for x86-based PCs, which may be downloaded from the official website and used via a USB flash drive. 2ff7e9595c
Comments